Online Catalogue

HomeSite MapSearchCheckoutStore TopUp a LevelContact Us

Product Sections

Main Pages

Best Sellers

JSV Matrix racing seats Black-Red on Vinyl

JSV Matrix racing seats Black-Red on Vinyl

149.00

4967
find out more

JSV Exhaust 4648

JSV Exhaust 4648

JSV STEERING WHELL STORM 2940

JSV STEERING WHELL STORM 2940

12,1" TFT Roof monitor incl. IR-Transmitter

12,1" TFT Roof monitor incl. IR-Transmitter

The Tipper 2.70m X 1.50m "PK Compact 20" 2000 kg

The Tipper 2.70m X 1.50m "PK Compact 20" 2000 kg

2,368.80



find out more

Mirror set L+R with conection

Mirror set L+R with conection

349.00

625 x 560mm For Coaches BOVA DAF SCANIA VOLVO VANHOOL NEOPLAN SETRA
find out more

Angel Eyes

Online Catalogue | Tuning How to Fit  |  Angel Eyes

1. Kit Contents: 2 Ballasts, 4 Glass Rings, Relay Harness, 4 Pin Connectors, 2 wire taps (I needed 4)
1. Kit Contents: 2 Ballasts, 4 Glass Rings, Relay Harness, 4 Pin Connectors, 2 wire taps (I needed 4)
2. Test Angel Eyes and Ballasts prior to installation using the car battery.
2. Test Angel Eyes and Ballasts prior to installation using the car battery.
3. Test Angel Eyes
3. Test Angel Eyes
4. Remove 3 Philips head screws that hold bumper on.
4. Remove 3 Philips head screws that hold bumper on.
5. Wiggle the bumper off on each side (this is the hardest part) I ended up breaking a clip here. Location of were the clips attach to.
5. Wiggle the bumper off on each side (this is the hardest part) I ended up breaking a clip here. Location of were the clips attach to.
6. Remove 3 bolts holding headlamp in place
6. Remove 3 bolts holding headlamp in place
7. Remove bolts
7. Remove bolts
8. Pull headlight out towards you.
8. Pull headlight out towards you.
9. Repeat the same procedure to the opposite side.
9. Repeat the same procedure to the opposite side.
10. Put headlight on baking pan and insert in oven for 18 -20 mins.
10. Put headlight on baking pan and insert in oven for 18 -20 mins.
11. Once baking is complete, start pulling lens away from the housing. Takes a lot of force. Note the tabs that need to be pulled away while separating.
11. Once baking is complete, start pulling lens away from the housing. Takes a lot of force. Note the tabs that need to be pulled away while separating.
12. Install glass rings (Angel Eyes) and use any glass bonding crazy glue or silicone alone the red area I marked.
Install rings from behind. I accidentally dropped the ring with glue on the reflective part and messed up the finish of the housing, by trying to install from the front (Lesson Learned).		12. Install glass rings (Angel Eyes) and use any glass bonding crazy glue or silicone alone the red area I marked.
13. Drill 2 small holes in the housing & Install the Parking Lamp glass ring (Angel Eye) and glue around the red marked area.
13. Drill 2 small holes in the housing & Install the Parking Lamp glass ring (Angel Eye) and glue around the red marked area.
14. Wires come out of the back side were the holes were drilled.
14. Wires come out of the back side were the holes were drilled.
15. Drill 4 holes in the outer housing assembly and route wires. Silicone around the holes to prevent moisture buildup inside headlight.
15. Drill 4 holes in the outer housing assembly and route wires. Silicone around the holes to prevent moisture buildup inside headlight.
16. Installation
16. Installation
17. Installation Parking light wires to ballast.
17. Installation Parking light wires to ballast.
18. This picture is just with the parking lamps and angel eyes turned on.
18. This picture is just with the parking lamps and angel eyes turned on.

Online Catalogue | Tuning How to Fit  |  Angel Eyes

2006 UK Accessories Ltd.  Contact Us | Privacy Policy | Terms & Conds

Хостинг от uCoz